ZIF連接器
FFC / FPC連接器與FFC和FPC對接可提供零插入力(ZIF)的規格。產品還有多樣型式例如掀蓋、抽拉型、直立式/臥式可以滿足復雜的FFC和FPC應用及操作。連接器還可以支持用于影像顯示、汽車信息娛樂系統和數據通信應用的高速信號傳輸速度和電源。
FFC / FPC連接器與FFC和FPC對接可提供零插入力(ZIF)的規格。產品還有多樣型式例如掀蓋、抽拉型、直立式/臥式可以滿足復雜的FFC和FPC應用及操作。連接器還可以支持用于影像顯示、汽車信息娛樂系統和數據通信應用的高速信號傳輸速度和電源。
消費市場: 液晶顯示電視、超高清電視、面板、家庭影院、筆記型電腦、平板、數位相機、攝影機、手持裝置、TWS耳機、智能家電、物聯網模組、游戲機等。
汽車市場: 汽車信息娛樂系統、行車紀錄器、自動駕駛應用等。
工業類市場: 刷卡機 、互動式多媒體機等。
1. 前掀蓋、后掀蓋及抽拉型式等不同蓋子的設計
2. 膠芯內有凸塊或凹槽設計
3. 有可靠的訊號端子及接地端子的設計
4. 多樣式的產品系列，包括間距及高度
1. 可以滿足復雜的FFC和FPC應用及操作
2. 提供接觸點對準并增加FFC/FPC的保持力
3. 實現高頻/高速數據傳輸和更好的EMI性能
4. 提供靈活的機械設計以滿足客戶需求
1. 膠芯: 耐高溫塑料UL 94 V-0
2. 後蓋: 耐高溫塑料UL 94 V-0
3. 端子: 銅合金，鍍金或鍍錫
4. 固定片或接地端子: 不銹鋼鍍錫
1. 額定電流:
- 1.1 0.3mm 間距: 0.2A/pin
- 1.2 0.5mm 間距: 0.4 或 0.5A/pin
- 1.3 1.0mm 間距: 0.5A/pin
2. 額定電壓:
- 1.1 0.3mm 間距: 30V(AC/DC)
- 1.2 0.5mm 間距: 50V(AC/DC)
- 1.3 1.0mm 間距: 125V(AC/DC)
3. 絕緣阻抗: 最小500MΩ
4. 耐電壓: 250 或 500VAC
5. 接觸阻抗:
- 5.1 0.3mm 間距: 最大100mΩ
- 5.2 0.5mm 間距: 最大30 或 40mΩ
- 5.3 1.0mm 間距: 最大40mΩ
1. 工作溫度:
- 1.1 -40°C ~ +85°C
- 1.2 -40°C ~ +105°C
2. 恒溫恒濕: 40±2°C，90~95%相對濕度，持續 96小時
3. 鹽霧:
- 3.1 35±2°C，5±1% 鹽濃度，持續 48小時
- 3.2 35+1°C/-2°C，5±1% 鹽濃度，持續 48小時
1. FFC/FPC 插入力:
- 1.1 0.3mm 間距: 最小15gf/pin
- 1.2 0.5mm 間距: 最小20 or 30gf/pin
- 1.3 1.0mm 間距: 最小30gf/pin
2. 插拔壽命:
- 2.1 0.3mm 間距: 20次
- 2.2 0.5mm 間距: 30次
- 2.3 1.0mm 間距: 30次
3. 震動:
- 3.1 1μs 最大，依據 MIL-STD-202 方法 201
- 3.2 1μs 最大，依據 EIA 364-28 條件 I
4. 機械沖擊:
- 4.1 1μs 最大，依據 MIL-STD-202 方法 213
- 4.2 1μs 最大，依據 EIA 364-27 條件 A
| Product Series | Pitch (mm) | Actuator Type | Product Height (mm) | Mounting Type | Orientation | Contact Position | Soldering Type | Additional GND | Cable Lock Type | Contact Point | Automotive Application |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 196640 | 0.5 | Back Flip | 1.0 | Top-Mount | Right Angle | Top/ Bottom | SMT | Without | Without | Single | NA |
| 196637 | 0.5 | Front Flip | 2.55 | Top-Mount | Right Angle | Bottom | SMT | Without | Without/External Prominence | Dual | NA |
| 196595 | 0.5 | Front Flip | 2.1 | Top-Mount | Right Angle | Bottom | SMT | With | Inner Notch | Dual | NA |
| 196657 | 0.5 | Front Flip | 2.1 | Top-Mount | Right Angle | Bottom | SMT | With | Inner Notch | Dual | NA |
| 196395 | 0.5 | Front Flip | 2.0 | Top-Mount | Right Angle | Bottom | SMT | Without | Without/External Prominence | Single | NA |
| 196033 | 0.5 | Front Flip | 2.0 | Top-Mount | Right Angle | Bottom | SMT | Without | Without | Single/Dual | NA |
| 196225 | 0.5 | Front Flip | 1.8 | Top-Mount | Right Angle | Bottom | SMT | Without | Without/External Prominence | Dual | NA |
| 196415 | 0.5 | Front Flip | 1.75 | Top-Mount | Right Angle | Bottom | SMT | Without | Without/External Prominence | Single | NA |
| 196570 | 0.5 | Front Flip | 1.55 | Top-Mount | Right Angle | Bottom | SMT | Without | Inner Notch | Dual | NA |
| 196479 | 0.5 | Front Flip | 1.5 | Top-Mount | Right Angle | Bottom | SMT | Without | Without | Dual | NA |
| 196490 | 1.0 | Front Flip | 1.0 | Top-Mount | Right Angle | Bottom | SMT | Without | Without | Single | NA |
| 196294 | 0.5 | Front Flip | 0.9 | Top-Mount | Right Angle | Bottom | SMT | Without | Without | Single | NA |
| 196200 | 0.3 | Front Flip | 1.0 | Top-Mount | Right Angle | Bottom | SMT | Without | Without | Single | NA |
| 196439 | 0.3 | Back Flip | 0.9 | Top-Mount | Right Angle | Top/ Bottom | SMT | Without | Without/External Prominence | Single | NA |
| 196533 | 0.3 | Back Flip | 0.9 | Top-Mount | Right Angle | Top/ Bottom | SMT | Without | Without/External Prominence | Single | NA |
| 196508 | 1.0 | Back Flip | 2.7 | Top-Mount | Right Angle | Bottom | SMT | Without | Inner Notch | Single | NA |
| 196047 | 1.0 | Front Flip | 2.0 | Top-Mount | Right Angle | Bottom | SMT | Without | Without | Single | NA |
| 196503 | 1.0 | Front Flip | 1.75 | Top-Mount | Right Angle | Bottom | SMT | Without | Without/External Prominence | Single | NA |
| 196087 | 1.0 | Front Flip | 1.5 | Top-Mount | Right Angle | Bottom | SMT | Without | Without | Single | NA |
| 196356 | 0.5 | Back Flip | 2.5 | Top-Mount | Right Angle | Bottom | SMT | With | Inner Notch | Single | NA |
| 196532 | 0.5 | Back Flip | 2.0 | Top-Mount | Right Angle | Top/ Bottom | SMT | Without | Without | Dual | NA |
| 196433 | 0.5 | Back Flip | 1.8 | Top-Mount | Right Angle | Bottom | SMT | Without | Inner Notch | Dual | NA |
| 196652 | 0.5 | Back Flip | 1.6 | Top-Mount | Right Angle | Bottom | SMT | Without | External Prominence | Dual | NA |
| 196357 | 0.5 | Back Flip | 1.2 | Top-Mount | Right Angle | Top/ Bottom | SMT | Without | Inner Notch | Single | NA |
| 196070 | 0.5 | Front Flip | 2.2 | Top-Mount | Right Angle | Bottom | SMT | Without | Without | Single | NA |
| 196528 | 0.8 | Back Flip | 1.5 | Top-Mount | Right Angle | Top/ Bottom | SMT | Without | Inner Notch | Dual | NA |
| 196579 | 0.8 | Front Flip | 1.2 | Top-Mount | Right Angle | Bottom | SMT | Without | Inner Notch | Single | NA |
| 196415-XX-36 | 0.5 | Front Flip | 1.75 | Top-Mount | Right Angle | Bottom | SMT | Without | Without/External Prominence | Single | Available |
| 196588 | 0.5 | Front Flip | 2.5 | Top-Mount | Right Angle | Bottom | SMT | Without | Inner Notch | Dual | Available |
| 196598 | 0.5 | Front Flip | 2.5 | Top-Mount | Right Angle | Bottom | SMT | With | External Prominence | Single | Available |
| 196542 | 0.5 | Front Flip | 2.55 | Top-Mount | Right Angle | Bottom | SMT | Without | Without/External Prominence | Dual | Available |
| 196541 | 1.0 | Front Flip | 2.0 | Top-Mount | Right Angle | Bottom | SMT | Without | Without | Dual | Available |
| 196564 | 1.0 | Draw | 5.5 | Top-Mount | Vertical | No Designated | SMT | Without | Inner Notch | Dual | Available |